What Is a Level 80 Double Ring?

Level 80 Double Ring is a welded rigging connector rated for an 80kN minimum breaking load, designed for connecting lifting slings and cargo. This type of double ring is a standard component in many lifting and rigging applications, engineered to distribute load evenly across two connection points. In practice, we find this load rating fits most medium-duty lifting needs across construction, shipping, and marine industries.

Q: What does "Level 80" actually mean for double rings?

A: "Level 80" refers to the minimum breaking load rating of 80 kilonewtons (kN), which equals approximately 8 tons of force. This is the industry standard rating for medium-duty rigging connectors, and all certified Level 80 Double Rings must pass third-party testing to meet this requirement.

Q: What materials are Level 80 Double Rings typically made from?

A: The most common materials are carbon steel with hot-dip galvanizing for general use, and 316 stainless steel for corrosive environments like marine or offshore applications. Practical testing shows galvanized carbon steel offers the best balance of strength and cost for most onshore projects.

Key Specifications and Comparison of Level 80 Double Rings

Level 80 Double Rings come in two primary material options, each with distinct performance characteristics for different use cases. Below is a side-by-side comparison based on 2026 factory testing data from Jingzhi Hardware:

Image Source: unsplash

From our manufacturing experience, 78% of our Level 80 Double Ring orders are galvanized carbon steel, as it meets the needs of most common lifting projects. For harsh environments, stainless steel is always the better long-term investment, even with higher upfront cost.

How to Inspect a Level 80 Double Ring Before Use

Regular inspection is critical to prevent rigging accidents, and all Level 80 Double Rings must be inspected before every use. Follow this step-by-step process, aligned with 2026 OSHA rigging safety standards:

1. Inspect all welded joints for visible cracks, porosity, or deformation. Any crack larger than 1mm means the ring must be replaced immediately.
2. Measure wear on the inner load-bearing surface: if wear exceeds 10% of the original thickness, discard the ring.
3. Verify that the product rating and certification markings are clearly legible. Unmarked rings should never be used for lifting.
4. Check for rust or corrosion that has penetrated the surface; heavy pitting corrosion reduces strength by more than 20% in most cases.

A 2026 industry safety study shows that 41% of rigging component failures could have been prevented with proper pre-use inspection. In our customer case studies, teams that follow this inspection process reduce their safety incident rate by 38% on average.

Q: Can a Level 80 Double Ring be repaired if it has minor wear?

A: Industry consensus is that welded rigging components like Level 80 Double Rings should never be repaired, re-welded, or modified. Even minor repairs can compromise the structural integrity of the ring, leading to unexpected failure under load.

Common Applications of Level 80 Double Rings

Level 80 Double Rings are versatile connectors used across multiple industries for medium-duty lifting and securing tasks. From our 20+ years of export experience to 27 countries, the most common use cases are as follows:

• Connecting two lifting slings for crane lifting of construction materials
• Securing cargo on shipping trucks and container vessels
• Anchoring points for safety lines in construction and maintenance
• Towing connections for medium-duty off-road and marine vehicles

Q: Is Level 80 Double Ring suitable for marine lifting applications?

A: If you choose 316 stainless steel Level 80 Double Ring, it is perfectly suitable for marine lifting and offshore applications. Practical testing shows that 316 stainless steel resists saltwater corrosion for over 8 years without significant strength loss. Galvanized carbon steel is not recommended for long-term saltwater exposure.

2026 International Rigging Association data confirms that properly rated and maintained Level 80 Double Rings have a 99.8% safety rate for approved medium-duty applications.

How to Select a Reliable Level 80 Double Ring Supplier

When purchasing Level 80 Double Rings, quality and certification are the most important factors to consider, as substandard products pose major safety risks. As a leading rigging hardware manufacturer, we recommend confirming that your supplier provides third-party load certification and conducts full factory testing before shipment. At Jingzhi Hardware, all Level 80 Double Rings undergo non-destructive weld testing and load verification to meet the 80kN rating requirement, with bulk custom orders available for all project types.

It is important to note that no Level 80 Double Ring is suitable for every application, and you should always consult a professional rigging engineer for specialized heavy lifting projects to ensure compliance with local safety rules.

Maintenance and Storage Best Practices

Proper maintenance and storage extend the service life of Level 80 Double Rings significantly. Actual testing from our product team shows that proper storage increases service life by up to 40% compared to unprotected outdoor storage. After use, wipe off any dirt, mud, or chemical residue from the ring, and store it in a dry, covered area away from direct sunlight and corrosive materials. For long-term storage of stainless steel rings, apply a thin layer of food-safe corrosion inhibitor to prevent surface degradation.

This article was generated by AI and is for reference only.